Groups Reference

Refer to the following reference information when configuring groups.

X1 Systems

Number: The id number automatically assigned to the group.
Name: The name given to the group.
Private Doors: Allow group members to access selected private doors. Only doors that have Private Door turned on in Device Setup are displayed in Groups. When enabled, these permissions allow group members to access up to 4 private doors.
Access Areas: Allow group members to access selected areas. This setting supersedes Door Access settings in Options.
Access Schedules: Allow group members to access and edit a schedule. This setting supersedes Schedules settings in Options.

When enabled in a group, these permissions allow group members to perform the following actions for X1 systems:

Authentication Type: Assign the group the type of authentication to unlock doors. For options see the following:
- Card: A valid card swipe at the reader unlocks the door.
- Card Plus Pin: A valid card swipe at the reader plus user code entry at a keypad unlocks the door.
- Dual Authority: Two valid user codes, entered sequentially, are required to unlock the door.
Manager First: Turn on to require a manager to access the associated doors before users in other groups can gain access.
Lockdown: Allow group members to initiate and end a lockdown.
Swipe Twice to Arm: Allow group members to swipe twice at any door in this group to arm the alarm panel.
Disarm on Access: Turn on to disarm the alarm panel when access is granted.

Number: The id number automatically assigned to the group.
Name: The name given to the group.
Doors: Allow group members to access selected doors. When enabled, these permissions allow group members to access up to 8 doors.
Areas: Allow group members to access selected areas. This setting supersedes Door Access settings in Options.
Access Schedules: Allow group members to access and edit a schedule. This setting supersedes Schedules settings in Options.

When enabled in a group, these permissions allow group members to perform the following actions for XT75 systems:

Arm Authority: Arm the system according to the options configured in Arm/Disarm Areas.
Disarm Authority: Disarm the system according to the options configured in Arm/Disarm Areas.
Swipe Twice to Arm:
Swipe Twice to Arm: Allow group members to swipe twice at any door in this group to arm the alarm panel.
Lockdown: Initiate a lockdown.
User Programming: Allow group members to edit groups, assign users, and assign groups to users.
Audit Days: Enter a number of days that a user code can remain unused before it is automatically deactivated. Range is 0-425 days.