Skip to main content
Skip table of contents

Assign a Camera to a Zone

Note: Video devices must be enabled on a system to assign a camera to a zone. For more information, refer to Enable Video Devices.

Dealer Admin allows you to assign cameras to zones. This feature allows clips to be recorded when the area a zone is located in goes into alarm.

To assign a camera to a zone, complete the following steps.

  1. Go to Customers.

  2. Select the system name.

  3. In Video, select Assign Cameras to Zones.

  4. In each zone’s row, select Choose a Camera and select the cameras that you want to assign to that zone.

  5. Select Save.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.