Skip to main content
Skip table of contents

Add an X1 Output Expansion Module

Make sure to keep track of the address number that Dealer Admin provides. This is the number that the address rotary is set to.

  1. Go to System Information.

  2. Under Outputs, select the Add icon.

  3. Select the X1 that the module is connected to.

  4. For Output Name, use a descriptive name for the output expansion module’s location,

  5. For each Relay, name each output that you intend to use. Unnamed outputs will not be programmed.

  6. Select Save.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.