Output Information

Dealer Admin helps you manage outputs on your customers’ systems. In this section, you’ll learn how to add, edit, and delete outputs.

1. Select the icon to add an output.

2. Enter the Output Number.

3. Enter the Output Name.

4. If a House Code is programmed in System Options, enter the Serial Number for the wireless output.

5. If a House Code is programmed in System Options, in Supervision Time, select one of the following options:

   • None (default)

   • 3

   • 60

   • 240

6. If you are programming an 1135 Wireless Siren, toggle Trip with Panel Bell ON to allow the 1135 to follow the panel’s Bell Output.

7. Toggle Real-time Status ON to enable real time messages to be sent for this output.

8. Add another output or select the (More) icon, then select Send Output Information.

Add an Output to Virtual Keypad

Note: Before starting, you’ll need to record the Output Number and Output Name of each output that you want to add to Virtual Keypad.

1. Log in to Dealer Admin (dealer.securecomwireless.com).

2. Go to Customers and select the System Name.

3. In System Information, select Edit.

4. Scroll down to Additional Features > Visible Outputs.

5. In Tracked Outputs, select Add.

6. Select the (Add) icon.

7. In the Output field, enter the Output Number.

8. In the Output Name field, enter the name of the output as you want it displayed in Virtual Keypad.

9. Select OK.

10. Select Save at the top or bottom of the screen.

Edit an Output

To edit an output, complete the following steps:

1. Log in to Dealer Admin (dealer.securecomwireless.com).

2. Go to Customers and select the System Name.

3. In left menu, go to Programming > Output Information.

4. Select an output.

5. Edit the output information, such as the Output Number, Output Name, Serial Number, and Supervision Time.

6. Select the (More) icon, then select Send Output Information.

Delete an Output

To delete an output from a system, complete the following steps:

1. Log in to Dealer Admin (dealer.securecomwireless.com).

2. Go to Customers and select the System Name.

3. In left menu, go to Programming > Output Information.

4. Find the output that you want to delete. Select the (More) icon, then select Remove.

5. A dialog pops up to confirm your decision. To delete the output, select OK.