System Reports

Complete the following steps to program which system reports the panel sends to the receiver:

1. Toggle Abort Reports ON to send reports to the receiver when the system is disarmed before the Transmit Delay and Bell Cutoff expire.

2. In Zone Restoral Reports, select one of the following options:

   • Yes—Enable Zone Restoral Reports. These reports send when a zone restores from a trouble or alarm condition.

   • No—Disable Zone Restoral Reports.

   • Disarm—Send Zone Restoral Reports when a non-24-hour zone that has restored from a trouble or alarm condition is disarmed.

3. Leave Bypass Reports toggled ON to send all zone bypasses, resets, and force arm reports to the receiver. Bypass Reports include the zone number, zone name, and the name and number of the user operating the system. This option is toggled ON by default.

Note: Bypass Reports only send if Opening/Closing & User Reports is toggled ON in Communication for Receiver 1 and Receiver 2.

4. Leave Schedule Change Reports toggled ON to send schedule changes to the receiver. This report includes the day, opening time, closing time, extend schedule time, and the name and number of the user who made the change. This option is toggled ON by default.

5. Leave Code Change Reports toggled ON to send all code additions, changes, and deletions to the receiver. This report includes the user name and number that was added, edited, or deleted, as well as the name and number of the user who made the change. This option is toggled ON by default.

Note: Code Change Reports only send if Opening/Closing & User Reports is toggled ON in Communication for Receiver 1 and Receiver 2.

6. Toggle Ambush Reports ON to to send a report when the user code for user number 1 is entered.

7. In Late to Open, enter the number of minutes from 1-240 that the system can remained armed after the scheduled opening time has elapsed, without sending a Late to Open message to the receiver.

8. In Early to Close, enter the number of minutes from 1-240 that the system can be armed before the scheduled closing time, without sending an Early to Close message to the receiver.

9. Select the (More) icon, then select Send System Reports.